summaryrefstree
path: root/kernel/drivers/phy/phy-exynos-usbdrd.h
blob: 71ff66c8574d5bddd07aaaed0d739e5199e8b0ea (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
/*
 * Copyright (C) 2015 Samsung Electronics Co., Ltd.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#ifndef __PHY_EXYNOS_USBDRD_H__
#define __PHY_EXYNOS_USBDRD_H__

#include "phy-samsung-usb-cal.h"
#include "phy-exynos-usb3p1.h"
#include "phy-exynos-usbdp.h"

#define EXYNOS_USBPHY_VER_02_0_0	0x0200	/* Lhotse - USBDP Combo PHY */

/* 9810 PMU register offset */
#define EXYNOS_USBDP_PHY_CONTROL	(0x704)
#define EXYNOS_USB2_PHY_CONTROL	(0x72C)
/* PMU register offset for USB */
#define EXYNOS_USBDEV_PHY_CONTROL	(0x704)
#define EXYNOS_USBDRD_ENABLE		BIT(0)
#define EXYNOS_USBHOST_ENABLE		BIT(1)

/* Exynos USB PHY registers */
#define EXYNOS_FSEL_9MHZ6		0x0
#define EXYNOS_FSEL_10MHZ		0x1
#define EXYNOS_FSEL_12MHZ		0x2
#define EXYNOS_FSEL_19MHZ2		0x3
#define EXYNOS_FSEL_20MHZ		0x4
#define EXYNOS_FSEL_24MHZ		0x5
#define EXYNOS_FSEL_26MHZ		0x82
#define EXYNOS_FSEL_50MHZ		0x7

/* EXYNOS: USB DRD PHY registers */
#define EXYNOS_DRD_LINKSYSTEM			0x04

#define LINKSYSTEM_FLADJ_MASK			(0x3f << 1)
#define LINKSYSTEM_FLADJ(_x)			((_x) << 1)

#define EXYNOS_DRD_PHYUTMI			0x08

#define EXYNOS_DRD_PHYPIPE			0x0c

#define PHYPIPE_PHY_CLOCK_SEL				(0x1 << 4)

#define EXYNOS_DRD_PHYCLKRST			0x10

#define PHYCLKRST_SSC_REFCLKSEL_MASK		(0xff << 23)
#define PHYCLKRST_SSC_REFCLKSEL(_x)		((_x) << 23)

#define PHYCLKRST_SSC_RANGE_MASK		(0x03 << 21)
#define PHYCLKRST_SSC_RANGE(_x)			((_x) << 21)

#define PHYCLKRST_MPLL_MULTIPLIER_MASK		(0x7f << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF	(0x19 << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF	(0x32 << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF	(0x68 << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF	(0x7d << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF	(0x02 << 11)

#define PHYCLKRST_FSEL_UTMI_MASK		(0x7 << 5)
#define PHYCLKRST_FSEL_PIPE_MASK		(0x7 << 8)
#define PHYCLKRST_FSEL(_x)			((_x) << 5)
#define PHYCLKRST_FSEL_PAD_100MHZ		(0x27 << 5)
#define PHYCLKRST_FSEL_PAD_24MHZ		(0x2a << 5)
#define PHYCLKRST_FSEL_PAD_20MHZ		(0x31 << 5)
#define PHYCLKRST_FSEL_PAD_19_2MHZ		(0x38 << 5)

#define PHYCLKRST_REFCLKSEL_MASK		(0x03 << 2)
#define PHYCLKRST_REFCLKSEL_PAD_REFCLK		(0x2 << 2)
#define PHYCLKRST_REFCLKSEL_EXT_REFCLK		(0x3 << 2)

#define EXYNOS_DRD_PHYREG0			0x14
#define EXYNOS_DRD_PHYREG1			0x18

#define EXYNOS_DRD_PHYPARAM0			0x1c

#define PHYPARAM0_REF_LOSLEVEL_MASK		(0x1f << 26)
#define PHYPARAM0_REF_LOSLEVEL			(0x9 << 26)

#define EXYNOS_DRD_PHYPARAM1			0x20

#define PHYPARAM1_PCS_TXDEEMPH_MASK		(0x1f << 0)
#define PHYPARAM1_PCS_TXDEEMPH			(0x1c)

#define EXYNOS_DRD_PHYTERM			0x24

#define EXYNOS_DRD_PHYTEST			0x28

#define EXYNOS_DRD_PHYADP			0x2c

#define EXYNOS_DRD_PHYUTMICLKSEL		0x30

#define PHYUTMICLKSEL_UTMI_CLKSEL		BIT(2)

#define EXYNOS_DRD_PHYRESUME			0x34
#define EXYNOS_DRD_LINKPORT			0x44

#define KHZ	1000
#define MHZ	(KHZ * KHZ)

#define EXYNOS_DRD_MAX_TUNEPARAM_NUM		32

enum exynos_usbdrd_phy_id {
	EXYNOS_DRDPHY_UTMI,
	EXYNOS_DRDPHY_PIPE3,
	EXYNOS_DRDPHYS_NUM,
};

struct phy_usb_instance;
struct exynos_usbdrd_phy;

struct exynos_usbdrd_phy_config {
	u32 id;
	void (*phy_isol)(struct phy_usb_instance *inst, u32 on, unsigned int);
	void (*phy_init)(struct exynos_usbdrd_phy *phy_drd);
	void (*phy_exit)(struct exynos_usbdrd_phy *phy_drd);
	void (*phy_tune)(struct exynos_usbdrd_phy *phy_drd, int);
	int (*phy_vendor_set)(struct exynos_usbdrd_phy *phy_drd, int, int);
	void (*phy_ilbk)(struct exynos_usbdrd_phy *phy_drd);
	void (*phy_set)(struct exynos_usbdrd_phy *phy_drd, int, void *);
	unsigned int (*set_refclk)(struct phy_usb_instance *inst);
};

struct exynos_usbdrd_phy_drvdata {
	const struct exynos_usbdrd_phy_config *phy_cfg;
};

/**
 * struct exynos_usbdrd_phy - driver data for USB DRD PHY
 * @dev: pointer to device instance of this platform device
 * @reg_phy: usb phy controller register memory base
 * @clk: phy clock for register access
 * @drv_data: pointer to SoC level driver data structure
 * @phys[]: array for 'EXYNOS_DRDPHYS_NUM' number of PHY
 *	    instances each with its 'phy' and 'phy_cfg'.
 * @extrefclk: frequency select settings when using 'separate
 *	       reference clocks' for SS and HS operations
 * @ref_clk: reference clock to PHY block from which PHY's
 *	     operational clocks are derived
 * @usbphy_info; Phy main control info
 * @usbphy_sub_info; USB3.0 phy control info
 */
struct exynos_usbdrd_phy {
	struct device *dev;
	void __iomem *reg_phy;
	void __iomem *reg_phy2;
	void __iomem *reg_phy3;
	struct clk **clocks;
	struct clk **phy_clocks;
	const struct exynos_usbdrd_phy_drvdata *drv_data;
	struct phy_usb_instance {
		struct phy *phy;
		u32 index;
		struct regmap *reg_pmu;
		u32 pmu_offset;
		u32 pmu_offset_dp;
		u32 pmu_mask;
		const struct exynos_usbdrd_phy_config *phy_cfg;
	} phys[EXYNOS_DRDPHYS_NUM];
	u32 extrefclk;
	bool use_phy_umux;
	struct clk *ref_clk;
	struct regulator *vbus;
	struct exynos_usbphy_info usbphy_info;
	struct exynos_usbphy_info usbphy_sub_info;
	struct exynos_usbphy_ss_tune ss_value[2];
	struct exynos_usbphy_hs_tune hs_value[2];
	int hs_tune_param_value[EXYNOS_DRD_MAX_TUNEPARAM_NUM][2];
	int ss_tune_param_value[EXYNOS_DRD_MAX_TUNEPARAM_NUM][2];

	u32 ip_type;
#if IS_ENABLED(CONFIG_EXYNOS_OTP)
#define OTP_SUPPORT_USBPHY_NUMBER	2
#define OTP_USB3PHY_INDEX		0
#define OTP_USB2PHY_INDEX		1
	u8 otp_type[OTP_SUPPORT_USBPHY_NUMBER];
	u8 otp_index[OTP_SUPPORT_USBPHY_NUMBER];
	struct tune_bits *otp_data[OTP_SUPPORT_USBPHY_NUMBER];
#endif
	int irq_wakeup;
	int irq_conn;
	int is_conn;
	int is_irq_enabled;
	u32 phy_port;
};

void __iomem *phy_exynos_usbdp_get_address(void);
extern int xhci_portsc_set(int on);

#endif	/* __PHY_EXYNOS_USBDRD_H__ */