/* * Copyright (C) 2012-2020 NXP Semiconductors * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ #ifndef _P61_H_ #define _P61_H_ #ifdef CONFIG_NFC_FEATURE_SN100U #define DEFAULT_BUFFER_SIZE 780 #else #define DEFAULT_BUFFER_SIZE 258 #endif #define P61_MAGIC 0xEB #if !defined(CONFIG_NFC_FEATURE_SN100U) #define P61_SET_PWR _IOW(P61_MAGIC, 0x01, unsigned long) #define P61_SET_DBG _IOW(P61_MAGIC, 0x02, unsigned long) #define P61_SET_POLL _IOW(P61_MAGIC, 0x03, unsigned long) /* To set SPI configurations like gpio, clks */ #define P61_SET_SPI_CONFIG _IO(P61_MAGIC, 0x04) /* Set the baud rate of SPI master clock nonTZ */ #define P61_ENABLE_SPI_CLK _IO(P61_MAGIC, 0x05) /* To disable spi core clock */ #define P61_DISABLE_SPI_CLK _IO(P61_MAGIC, 0x06) /* only nonTZ +++++*/ /* Transmit data to the device and retrieve data from it simultaneously.*/ #define P61_RW_SPI_DATA _IOWR(P61_MAGIC, 0x07, unsigned long) /* only nonTZ -----*/ /* * SPI Request NFCC to enable p61 power, only in param * Only for SPI * level 1 = Enable power * level 0 = Disable power */ #define P61_SET_SPM_PWR _IOW(P61_MAGIC, 0x08, unsigned int) /* SPI or DWP can call this ioctl to get the current * power state of P61 * */ #define P61_GET_SPM_STATUS _IOR(P61_MAGIC, 0x09, unsigned int) #define P61_GET_ESE_ACCESS _IOW(P61_MAGIC, 0x0A, unsigned int) #define P61_SET_DWNLD_STATUS _IOW(P61_MAGIC, 0x0B, unsigned long) #else #define P61_SET_PWR _IOW(P61_MAGIC, 0x01, long) #define P61_SET_DBG _IOW(P61_MAGIC, 0x02, long) #define P61_SET_POLL _IOW(P61_MAGIC, 0x03, long) /* SPI Request NFCC to enable p61 power, only in param * Only for SPI * level 1 = Enable power * level 0 = Disable power */ #define P61_SET_SPM_PWR _IOW(P61_MAGIC, 0x04, long) /* SPI or DWP can call this ioctl to get the current * power state of P61 */ #define P61_GET_SPM_STATUS _IOR(P61_MAGIC, 0x05, long) #define P61_SET_THROUGHPUT _IOW(P61_MAGIC, 0x06, long) #define P61_GET_ESE_ACCESS _IOW(P61_MAGIC, 0x07, long) #define P61_SET_POWER_SCHEME _IOW(P61_MAGIC, 0x08, long) #define P61_SET_DWNLD_STATUS _IOW(P61_MAGIC, 0x09, long) #define P61_INHIBIT_PWR_CNTRL _IOW(P61_MAGIC, 0x0A, long) #ifdef CONFIG_NFC_FEATURE_SN100U /* * SPI can call this IOCTL to perform the eSE COLD_RESET * via NFC driver. */ #define ESE_PERFORM_COLD_RESET _IOW(P61_MAGIC, 0x0C, long) #define PERFORM_RESET_PROTECTION _IOW(P61_MAGIC, 0x0D, long) #endif /* only nonTZ +++++*/ /* Transmit data to the device and retrieve data from it simultaneously.*/ #define P61_RW_SPI_DATA _IOWR(P61_MAGIC, 0x0F, unsigned long) /* only nonTZ -----*/ #endif struct p61_ioctl_transfer { unsigned char *rx_buffer; unsigned char *tx_buffer; unsigned int len; }; struct p61_spi_platform_data { unsigned int irq_gpio; unsigned int rst_gpio; }; enum { SPI_CLK, /* gate_spi_clk */ SPI_SRC_CLK, /* ipclk_spi */ MAX_SPI_CLK_CNT, }; #endif