/* * Copyright (C) 2015, Samsung Electronics Co. Ltd. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #ifndef __SSP_PRJ_H__ #define __SSP_PRJ_H__ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../../staging/android/android_alarm.h" #include "factory/ssp_factory.h" #include "factory/ssp_mcu.h" #include "ssp_sensorlist.h" #include "ssp_data.h" #include "ssp_debug.h" #include "ssp_dev.h" #include "ssp_firmware.h" #include "ssp_iio.h" #include "ssp_misc.h" #include "ssp_sensorhub.h" #include "ssp_spi.h" #include "ssp_sysfs.h" #include "sensors_core.h" #undef CONFIG_SEC_DEBUG #define CONFIG_SEC_DEBUG 0 #define DEFUALT_POLLING_DELAY (200 * NSEC_PER_MSEC) #define DATA_PACKET_SIZE 960 /* AP -> SSP Instruction */ #define MSG2SSP_INST_BYPASS_SENSOR_ADD 0xA1 #define MSG2SSP_INST_BYPASS_SENSOR_REMOVE 0xA2 #define MSG2SSP_INST_REMOVE_ALL 0xA3 #define MSG2SSP_INST_CHANGE_DELAY 0xA4 #define MSG2SSP_INST_LIBRARY_ADD 0xB1 #define MSG2SSP_INST_LIBRARY_REMOVE 0xB2 #define MSG2SSP_INST_LIB_NOTI 0xB4 #define MSG2SSP_INST_LIB_DATA 0xC1 #define MSG2SSP_AP_FUSEROM 0X01 #define MSG2SSP_AP_MCU_SET_GYRO_CAL 0xCD #define MSG2SSP_AP_MCU_SET_ACCEL_CAL 0xCE #define MSG2SSP_AP_STATUS_SHUTDOWN 0xD0 #define MSG2SSP_AP_STATUS_WAKEUP 0xD1 #define MSG2SSP_AP_STATUS_SLEEP 0xD2 #define MSG2SSP_AP_STATUS_RESUME 0xD3 #define MSG2SSP_AP_STATUS_SUSPEND 0xD4 #define MSG2SSP_AP_STATUS_RESET 0xD5 #define MSG2SSP_AP_STATUS_POW_CONNECTED 0xD6 #define MSG2SSP_AP_STATUS_POW_DISCONNECTED 0xD7 #define MSG2SSP_AP_TEMPHUMIDITY_CAL_DONE 0xDA #define MSG2SSP_AP_MCU_SET_DUMPMODE 0xDB #define MSG2SSP_AP_MCU_BATCH_FLUSH 0xDD #define MSG2SSP_AP_MCU_BATCH_COUNT 0xDF #ifdef CONFIG_SENSORS_MULTIPLE_GLASS_TYPE #define MSG2SSP_AP_GLASS_TYPE 0xEC #endif #define MSG2SSP_AP_WHOAMI 0x0F #define MSG2SSP_AP_FIRMWARE_REV 0xF0 #define MSG2SSP_AP_SENSOR_FORMATION 0xF1 #define MSG2SSP_AP_SENSOR_PROXTHRESHOLD 0xF2 #define MSG2SSP_AP_SENSOR_BARCODE_EMUL 0xF3 #define MSG2SSP_AP_SENSOR_SCANNING 0xF4 #define MSG2SSP_AP_SET_MAGNETIC_HWOFFSET 0xF5 #define MSG2SSP_AP_GET_MAGNETIC_HWOFFSET 0xF6 #define MSG2SSP_AP_SENSOR_GESTURE_CURRENT 0xF7 #define MSG2SSP_AP_GET_THERM 0xF8 #define MSG2SSP_AP_GET_BIG_DATA 0xF9 #define MSG2SSP_AP_SET_BIG_DATA 0xFA #define MSG2SSP_AP_START_BIG_DATA 0xFB #define MSG2SSP_AP_SET_MAGNETIC_STATIC_MATRIX 0xFD #define MSG2SSP_AP_SENSOR_TILT 0xEA #define MSG2SSP_AP_MCU_SET_TIME 0xFE #define MSG2SSP_AP_MCU_GET_TIME 0xFF #define MSG2SSP_AP_MOBEAM_DATA_SET 0x31 #define MSG2SSP_AP_MOBEAM_REGISTER_SET 0x32 #define MSG2SSP_AP_MOBEAM_COUNT_SET 0x33 #define MSG2SSP_AP_MOBEAM_START 0x34 #define MSG2SSP_AP_MOBEAM_STOP 0x35 #define MSG2SSP_AP_GEOMAG_LOGGING 0x36 #define MSG2SSP_AP_SENSOR_LPF 0x37 #define MSG2SSP_AP_IRDATA_SEND 0x38 #define MSG2SSP_AP_IRDATA_SEND_RESULT 0x39 #define MSG2SSP_AP_PROX_GET_TRIM 0x40 #define SUCCESS 1 #define FAIL 0 #define ERROR -1 #define ssp_dbg(format, ...) do { \ pr_debug("[SSP] " format "\n", ##__VA_ARGS__); \ } while (0) #define ssp_info(format, ...) do { \ pr_info("[SSP] " format "\n", ##__VA_ARGS__); \ } while (0) #define ssp_err(format, ...) do { \ pr_err("[SSP] " format "\n", ##__VA_ARGS__); \ } while (0) #define ssp_dbgf(format, ...) do { \ pr_debug("[SSP] %s: " format "\n", __func__, ##__VA_ARGS__); \ } while (0) #define ssp_infof(format, ...) do { \ pr_info("[SSP] %s: " format "\n", __func__, ##__VA_ARGS__); \ } while (0) #define ssp_errf(format, ...) do { \ pr_err("[SSP] %s: " format "\n", __func__, ##__VA_ARGS__); \ } while (0) /* SSP Binary Type */ enum { KERNEL_BINARY = 0, KERNEL_CRASHED_BINARY, UMS_BINARY, }; /* * SENSOR_DELAY_SET_STATE * Check delay set to avoid sending ADD instruction twice */ enum { INITIALIZATION_STATE = 0, NO_SENSOR_STATE, ADD_SENSOR_STATE, RUNNING_SENSOR_STATE, }; /* Firmware download STATE */ enum { FW_DL_STATE_FAIL = -1, FW_DL_STATE_NONE = 0, FW_DL_STATE_NEED_TO_SCHEDULE, FW_DL_STATE_SCHEDULED, FW_DL_STATE_DOWNLOADING, FW_DL_STATE_SYNC, FW_DL_STATE_DONE, }; /* SSP_INSTRUCTION_CMD */ enum { REMOVE_SENSOR = 0, ADD_SENSOR, CHANGE_DELAY, GO_SLEEP, REMOVE_LIBRARY, ADD_LIBRARY, }; /* SENSOR_TYPE */ enum { ACCELEROMETER_SENSOR = 0, GYROSCOPE_SENSOR, GEOMAGNETIC_UNCALIB_SENSOR, GEOMAGNETIC_RAW, GEOMAGNETIC_SENSOR, PRESSURE_SENSOR, GESTURE_SENSOR, PROXIMITY_SENSOR, TEMPERATURE_HUMIDITY_SENSOR, LIGHT_SENSOR, PROXIMITY_RAW, ORIENTATION_SENSOR, STEP_DETECTOR = 12, SIG_MOTION_SENSOR, GYRO_UNCALIB_SENSOR, GAME_ROTATION_VECTOR = 15, ROTATION_VECTOR, STEP_COUNTER, BIO_HRM_RAW, BIO_HRM_RAW_FAC, BIO_HRM_LIB, SHAKE_CAM = 22, #ifdef CONFIG_SENSORS_SSP_IRDATA_FOR_CAMERA LIGHT_IR_SENSOR = 24, #endif INTERRUPT_GYRO_SENSOR, META_SENSOR, SENSOR_MAX, }; enum { AP2HUB_READ = 0, AP2HUB_WRITE, HUB2AP_WRITE, AP2HUB_READY, AP2HUB_RETURN }; enum { BIG_TYPE_DUMP = 0, BIG_TYPE_READ_LIB, BIG_TYPE_MAX, }; extern struct class *sensors_event_class; struct sensor_value { union { struct { /* accel, gyro, mag */ s16 x; s16 y; s16 z; u32 gyro_dps; } __attribute__((__packed__)); struct { /*calibrated mag, gyro*/ s16 cal_x; s16 cal_y; s16 cal_z; u8 accuracy; } __attribute__((__packed__)); struct { /*uncalibrated mag, gyro*/ s16 uncal_x; s16 uncal_y; s16 uncal_z; s16 offset_x; s16 offset_y; s16 offset_z; } __attribute__((__packed__)); struct { /* rotation vector */ s32 quat_a; s32 quat_b; s32 quat_c; s32 quat_d; u8 acc_rot; } __attribute__((__packed__)); struct { /* light */ u16 r; u16 g; u16 b; u16 w; u8 a_time; u8 a_gain; } __attribute__((__packed__)); #ifdef CONFIG_SENSORS_SSP_IRDATA_FOR_CAMERA struct { /* light ir */ u16 irdata; u16 ir_r; u16 ir_g; u16 ir_b; u16 ir_w; u8 ir_a_time; u8 ir_a_gain; } __attribute__((__packed__)); #endif struct { /* pressure */ s32 pressure; s16 temperature; s32 pressure_cal; s32 pressure_sealevel; } __attribute__((__packed__)); struct { /* step detector */ u8 step_det; }; struct { /* step counter */ u32 step_diff; u64 step_total; } __attribute__((__packed__)); struct { /* proximity */ u8 prox; u16 prox_ex; } __attribute__((__packed__)); struct { /* proximity raw */ u16 prox_raw[4]; }; struct { /* significant motion */ u8 sig_motion; }; struct meta_data_event { /* meta data */ s32 what; s32 sensor; } __attribute__((__packed__)) meta_data; u8 data[20]; }; u64 timestamp; } __attribute__((__packed__)); struct calibraion_data { s16 x; s16 y; s16 z; }; struct ssp_msg { u8 cmd; u16 length; u16 options; u32 data; struct list_head list; struct completion *done; char *buffer; u8 free_buffer; bool *dead_hook; bool dead; } __attribute__((__packed__)); enum { BATCH_MODE_NONE = 0, BATCH_MODE_RUN, }; struct ssp_time_diff { u16 batch_count; u16 batch_mode; u64 time_diff; u64 irq_diff; u16 batch_count_fixed; }; struct ssp_data { char name[SENSOR_MAX][SENSOR_NAME_MAX_LEN]; bool enable[SENSOR_MAX]; int data_len[SENSOR_MAX]; int report_len[SENSOR_MAX]; struct sensor_value buf[SENSOR_MAX]; struct iio_dev *indio_devs[SENSOR_MAX]; struct iio_chan_spec indio_channels[SENSOR_MAX]; struct device *devices[SENSOR_MAX]; struct spi_device *spi; struct wake_lock ssp_wake_lock; struct timer_list debug_timer; struct workqueue_struct *debug_wq; struct work_struct work_debug; struct calibraion_data accelcal; struct calibraion_data gyrocal; struct device *mcu_device; struct device *prs_device; struct device *prox_device; struct device *light_device; struct device *ges_device; struct device *irled_device; struct device *mobeam_device; struct delayed_work work_firmware; struct delayed_work work_refresh; struct miscdevice shtc1_device; struct miscdevice batch_io_device; bool bSspShutdown; bool bAccelAlert; bool bProximityRawEnabled; bool bGeomagneticRawEnabled; bool bBarcodeEnabled; bool bMcuDumpMode; bool bBinaryChashed; bool bProbeIsDone; bool bDumping; bool bTimeSyncing; unsigned int uProxCanc; unsigned int uCrosstalk; unsigned int uProxCalResult; unsigned int uProxHiThresh; unsigned int uProxLoThresh; unsigned int uProxHiThresh_default; unsigned int uProxLoThresh_default; unsigned int uIr_Current; unsigned char uFuseRomData[3]; unsigned char uMagCntlRegData; char *pchLibraryBuf; char chLcdLdi[2]; int iIrq; int iLibraryLength; int aiCheckStatus[SENSOR_MAX]; unsigned int uComFailCnt; unsigned int uResetCnt; unsigned int uTimeOutCnt; unsigned int uIrqCnt; unsigned int uDumpCnt; unsigned int uSensorState; unsigned int uCurFirmRev; unsigned int uFactoryProxAvg[4]; char uLastResumeState; char uLastAPState; atomic_t aSensorEnable; int64_t adDelayBuf[SENSOR_MAX]; s32 batchLatencyBuf[SENSOR_MAX]; s8 batchOptBuf[SENSOR_MAX]; u64 lastTimestamp[SENSOR_MAX]; bool reportedData[SENSOR_MAX]; struct ssp_sensorhub_data *hub_data; int accel_position; int mag_position; int fw_dl_state; unsigned char pdc_matrix[PDC_SIZE]; struct mutex comm_mutex; struct mutex pending_mutex; int mcu_int1; int mcu_int2; int ap_int; int rst; struct list_head pending_list; void (*ssp_big_task[BIG_TYPE_MAX])(struct work_struct *); u64 timestamp; struct file *realtime_dump_file; int total_dump_size; #ifdef CONFIG_SENSORS_MULTIPLE_GLASS_TYPE u32 glass_type; #endif #ifdef CONFIG_SENSORS_SSP_IRDATA_FOR_CAMERA int light_ir_log_cnt; #endif int acc_type; int pressure_type; atomic_t int_gyro_enable; }; struct ssp_big { struct ssp_data *data; struct work_struct work; u32 length; u32 addr; }; #endif