#ifndef _LINUX_WACOM_H #define _LINUX_WACOM_H #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_HAS_EARLYSUSPEND #include #endif #include #ifdef CONFIG_INPUT_BOOSTER #include #endif #define USE_OPEN_CLOSE #ifdef CONFIG_EPEN_WACOM_W9018 #define WACOM_FW_SIZE 131072 #elif defined(CONFIG_EPEN_WACOM_W9014) #define WACOM_FW_SIZE 131092 #elif defined(CONFIG_EPEN_WACOM_W9012) #define WACOM_FW_SIZE 131072 #elif defined(CONFIG_EPEN_WACOM_G9PM) #define WACOM_FW_SIZE 61440 #elif defined(CONFIG_EPEN_WACOM_G9PLL) \ || defined(CONFIG_EPEN_WACOM_G10PM) #define WACOM_FW_SIZE 65535 #else #define WACOM_FW_SIZE 32768 #endif /* SURVEY MODE is LPM mode : Only detect grage(pdct) & aop */ #define WACOM_USE_SURVEY_MODE #define WACOM_NORMAL_MODE false #define WACOM_BOOT_MODE true /*Wacom Command*/ #define COM_COORD_NUM 12 #define COM_RESERVED_NUM 2 #define COM_QUERY_NUM 14 #define COM_QUERY_POS (COM_COORD_NUM+COM_RESERVED_NUM) #define COM_QUERY_BUFFER (COM_QUERY_POS+COM_QUERY_NUM) #define COM_QUERY_RETRY 3 #define COM_SAMPLERATE_STOP 0x30 #define COM_SAMPLERATE_40 0x33 #define COM_SAMPLERATE_80 0x32 #define COM_SAMPLERATE_133 0x31 #define COM_SAMPLERATE_START COM_SAMPLERATE_133 #define COM_SURVEYSCAN 0x2B #define COM_QUERY 0x2A #define COM_SURVEYEXIT 0x2D #define COM_SURVEYREQUESTDATA 0x2E #define COM_SURVEY_TARGET_GARAGE_AOP 0x3A #define COM_SURVEY_TARGET_GARAGEONLY 0x3B #define COM_FLASH 0xff #define COM_CHECKSUM 0x63 #define COM_NORMAL_SENSE_MODE 0xDB #define COM_LOW_SENSE_MODE 0xDC #define COM_LOW_SENSE_MODE2 0xE7 #define COM_REQUEST_SENSE_MODE 0xDD #define COM_REQUESTSCANMODE 0xE6 /* data format for SURVEY mode*/ #define EPEN_SURVEY_NONE 0x000 #define EPEN_SURVEY_AOP 0x100 #define EPEN_SURVEY_GARAGE 0x200 #define EPEN_SURVEY_GARAGE_IN 0x1 #define EPEN_SURVEY_GARAGE_OUT 0x0 /*--------------------------------------------------*/ // function setting by user or default // wac_i2c->function_set // 7.Garage | 6.Power Save | 5.AOP | 4.reserved || 3.reserved | 2. reserved | 1. reserved | 0. reserved | // // 6. Power Save - not imported // // // event //wac_i2c->function_result // 7. ~ 4. reserved || 3. Garage | 2. Power Save | 1. AOP | 0. Pen In/Out | // // 0. Pen In/Out ( pen_insert ) // ( 0: IN / 1: OUT ) /*--------------------------------------------------*/ #define EPEN_EVENT_PEN_INOUT (0x1<<0) #define EPEN_EVENT_AOP (0x1<<1) #define EPEN_EVENT_POWRSAVE (0x1<<2) #define EPEN_EVENT_GARAGE (0x1<<3) #define EPEN_SETMODE_PEN_INOUT (0x1<<4) #define EPEN_SETMODE_AOP (0x1<<5) #define EPEN_SETMODE_POWRSAVE (0x1<<6) #define EPEN_SETMODE_GARAGE (0x1<<7) #define EPEN_SURVEY_MODE_GARAGE_AOP 0x0 #define EPEN_SURVEY_MODE_GARAGE_ONLY 0x1 /* query data format */ #define EPEN_REG_HEADER 0x00 #define EPEN_REG_X1 0x01 #define EPEN_REG_X2 0x02 #define EPEN_REG_Y1 0x03 #define EPEN_REG_Y2 0x04 #define EPEN_REG_PRESSURE1 0x05 #define EPEN_REG_PRESSURE2 0x06 #define EPEN_REG_FWVER1 0X07 #define EPEN_REG_FWVER2 0X08 #define EPEN_REG_MPUVER 0X09 #define EPEN_REG_BLVER 0X0A #define EPEN_REG_TILT_X 0X0B #define EPEN_REG_TILT_Y 0X0C #define EPEN_REG_HEIGHT 0X0D /*Information for input_dev*/ #define EMR 0 #define WACOM_PKGLEN_I2C_EMR 0 /*Special keys*/ #define EPEN_TOOL_PEN 0x220 #define EPEN_TOOL_RUBBER 0x221 #define EPEN_STYLUS 0x22b #define EPEN_STYLUS2 0x22c #define WACOM_DELAY_FOR_RST_RISING 200 /* #define INIT_FIRMWARE_FLASH */ #define WACOM_PDCT_WORK_AROUND #define WACOM_USE_QUERY_DATA /*PDCT Signal*/ #define PDCT_NOSIGNAL 1 #define PDCT_DETECT_PEN 0 #define WACOM_PRESSURE_MAX 1023 /*Digitizer Type*/ #define EPEN_DTYPE_B660 1 #define EPEN_DTYPE_B713 2 #define EPEN_DTYPE_B746 3 #define EPEN_DTYPE_B804 4 #define EPEN_DTYPE_B878 5 #define EPEN_DTYPE_B887 6 #define EPEN_DTYPE_B911 7 #define EPEN_DTYPE_B934 8 #define EPEN_DTYPE_B968 9 #define WACOM_I2C_MODE_BOOT 1 #define WACOM_I2C_MODE_NORMAL 0 #ifdef WACOM_USE_SURVEY_MODE #define EPEN_RESUME_DELAY 20 #else #define EPEN_RESUME_DELAY 180 #endif #define EPEN_OFF_TIME_LIMIT 10000 // usec /* softkey block workaround */ #define WACOM_USE_SOFTKEY_BLOCK #define SOFTKEY_BLOCK_DURATION (HZ / 10) /* LCD freq sync */ #ifdef CONFIG_WACOM_LCD_FREQ_COMPENSATE /* NOISE from LDI. read Vsync at wacom firmware. */ #define LCD_FREQ_SYNC #endif #ifdef LCD_FREQ_SYNC #define LCD_FREQ_BOTTOM 60100 #define LCD_FREQ_TOP 60500 #endif #define LCD_FREQ_SUPPORT_HWID 8 #define HSYNC_COUNTER_UMAGIC 0x96 #define HSYNC_COUNTER_LMAGIC 0xCA #define WACOM_NOISE_HIGH 0x11 #define WACOM_NOISE_LOW 0x22 /*IRQ TRIGGER TYPE*/ /*#define EPEN_IRQF_TRIGGER_TYPE IRQF_TRIGGER_FALLING*/ #define WACOM_USE_PDATA #define WACOM_USE_SOFTKEY /* For Android origin */ #define WACOM_POSX_MAX WACOM_MAX_COORD_Y #define WACOM_POSY_MAX WACOM_MAX_COORD_X #define COOR_WORK_AROUND //#define WACOM_IMPORT_FW_ALGO /*#define WACOM_USE_OFFSET_TABLE*/ #if 0 #define WACOM_USE_AVERAGING #define WACOM_USE_AVE_TRANSITION #define WACOM_USE_BOX_FILTER #define WACOM_USE_TILT_OFFSET #endif /*Box Filter Parameters*/ //#define X_INC_S1 1500 //#define X_INC_E1 (WACOM_MAX_COORD_X - 1500) //#define Y_INC_S1 1500 //#define Y_INC_E1 (WACOM_MAX_COORD_Y - 1500) // //#define Y_INC_S2 500 //#define Y_INC_E2 (WACOM_MAX_COORD_Y - 500) //#define Y_INC_S3 1100 //#define Y_INC_E3 (WACOM_MAX_COORD_Y - 1100) /*HWID to distinguish Digitizer*/ //#define WACOM_DTYPE_B934_HWID 4 //#define WACOM_DTYPE_B968_HWID 6 //#define WACOM_USE_I2C_GPIO #ifdef WACOM_USE_PDATA #undef WACOM_USE_QUERY_DATA #endif #define FW_UPDATE_RUNNING 1 #define FW_UPDATE_PASS 2 #define FW_UPDATE_FAIL -1 /*Parameters for wacom own features*/ struct wacom_features { char comstat; unsigned int fw_version; int update_status; }; #define WACOM_FW_PATH "epen/W9012_T.bin" enum { FW_NONE = 0, FW_BUILT_IN, FW_HEADER, FW_IN_SDCARD, FW_EX_SDCARD, }; /* header ver 1 */ struct fw_image { u8 hdr_ver; u8 hdr_len; u16 fw_ver1; u16 fw_ver2; u16 fw_ver3; u32 fw_len; u8 checksum[5]; u8 alignment_dummy[3]; u8 data[0]; } __attribute__ ((packed)); struct wacom_i2c { struct i2c_client *client; struct i2c_client *client_boot; struct completion init_done; struct input_dev *input_dev; #ifdef CONFIG_HAS_EARLYSUSPEND struct early_suspend early_suspend; #endif struct mutex lock; struct mutex update_lock; struct mutex irq_lock; struct wake_lock fw_wakelock; struct wake_lock det_wakelock; struct device *dev; int irq; int irq_pdct; int pen_pdct; int pen_prox; int pen_pressed; int side_pressed; bool fullscan_mode; int tsp_noise_mode; int wacom_noise_state; int tool; int soft_key_pressed[2]; struct delayed_work pen_insert_dwork; #ifdef WACOM_USE_SURVEY_MODE struct delayed_work pen_survey_resetdwork; #endif #ifdef WACOM_IMPORT_FW_ALGO bool use_offset_table; bool use_aveTransition; #endif bool checksum_result; struct wacom_features *wac_feature; struct wacom_g5_platform_data *pdata; struct wacom_g5_callbacks callbacks; struct delayed_work resume_work; struct delayed_work fullscan_check_work; bool connection_check; int fail_channel; int min_adc_val; bool battery_saving_mode; bool pwr_flag; bool power_enable; #ifdef WACOM_USE_SURVEY_MODE bool survey_mode; bool survey_cmd_state; bool epen_blocked; u8 function_set; u8 function_result; bool reset_flag; #endif bool boot_mode; bool query_status; int wcharging_mode; #ifdef LCD_FREQ_SYNC int lcd_freq; bool lcd_freq_wait; bool use_lcd_freq_sync; struct work_struct lcd_freq_work; struct delayed_work lcd_freq_done_work; struct mutex freq_write_lock; #endif #ifdef WACOM_USE_SOFTKEY_BLOCK bool block_softkey; struct delayed_work softkey_block_work; #endif struct work_struct update_work; const struct firmware *firm_data; struct workqueue_struct *fw_wq; u8 fw_path; struct fw_image *fw_img; bool do_crc_check; struct pinctrl *pinctrl_irq; struct pinctrl_state *pin_state_irq; #ifdef WACOM_USE_I2C_GPIO struct pinctrl *pinctrl_i2c; struct pinctrl_state *pin_state_i2c; struct pinctrl_state *pin_state_gpio; #endif }; #endif /* _LINUX_WACOM_H */