/** * core.c - DesignWare USB3 DRD Controller Core file * * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com * * Authors: Felipe Balbi , * Sebastian Andrzej Siewior * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 of * the License as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "platform_data.h" #include "core.h" #include "gadget.h" #include "io.h" #include "debug.h" /* -------------------------------------------------------------------------- */ void dwc3_set_mode(struct dwc3 *dwc, u32 mode) { u32 reg; reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)); reg |= DWC3_GCTL_PRTCAPDIR(mode); dwc3_writel(dwc->regs, DWC3_GCTL, reg); } /** * dwc3_core_soft_reset - Issues core soft reset and PHY reset * @dwc: pointer to our context structure */ static void dwc3_core_soft_reset(struct dwc3 *dwc) { u32 reg; /* Before Resetting PHY, put Core in Reset */ reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg |= DWC3_GCTL_CORESOFTRESET; dwc3_writel(dwc->regs, DWC3_GCTL, reg); /* Assert USB3 PHY reset */ reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST; dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); /* Assert USB2 PHY reset */ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST; dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); usb_phy_init(dwc->usb2_phy); usb_phy_init(dwc->usb3_phy); mdelay(100); /* Clear USB3 PHY reset */ reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); /* Clear USB2 PHY reset */ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); mdelay(100); /* After PHYs are stable we can take Core out of reset state */ reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_CORESOFTRESET; dwc3_writel(dwc->regs, DWC3_GCTL, reg); } void dwc3_core_config(struct dwc3 *dwc) { u32 reg; /* AHB bus configuration */ reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); reg |= (DWC3_GSBUSCFG0_INCRBRSTEN | DWC3_GSBUSCFG0_INCR16BRSTEN); dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG1); reg |= (DWC3_GSBUSCFG1_BREQLIMIT(3)); dwc3_writel(dwc->regs, DWC3_GSBUSCFG1, reg); /* * WORKAROUND: * For ss bulk-in data packet, when the host detects * a DPP error or the internal buffer becomes full, * it retries with an ACK TP Retry=1. Under the following * conditions, the Retry=1 is falsely carried over to the next * DWC3_GUCTL_USBHSTINAUTORETRYEN should be set to a one * regardless of revision * - There is only single active asynchronous SS EP at the time. * - The active asynchronous EP is a Bulk IN EP. * - The burst with the correctly Retry=1 ACK TP and * the next burst belong to the same transfer. */ reg = dwc3_readl(dwc->regs, DWC3_GUCTL); reg |= (DWC3_GUCTL_USBHSTINAUTORETRYEN); if (dwc->adj_sof_accuracy) { reg &= ~DWC3_GUCTL_REFCLKPER_MASK; reg |= DWC3_GUCTL_REFCLKPER(0x29); } dwc3_writel(dwc->regs, DWC3_GUCTL, reg); if (dwc->revision >= DWC3_REVISION_190A && dwc->revision <= DWC3_REVISION_210A) { reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG); reg &= ~(DWC3_GRXTHRCFG_USBRXPKTCNT_MASK | DWC3_GRXTHRCFG_USBMAXRXBURSTSIZE_MASK); reg |= (DWC3_GRXTHRCFG_USBRXPKTCNTSEL | DWC3_GRXTHRCFG_USBRXPKTCNT(3) | DWC3_GRXTHRCFG_USBMAXRXBURSTSIZE(3)); dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg); } /* * WORKAROUND: DWC3 revisions 2.10a and earlier have a bug * The delay of the entry to a low power state such that * for applications where the link stays in a non-U0 state * for a short duration(< 1 microsecond), * the local PHY does not enter the low power state prior * to receiving a potential LFPS wakeup. * This causes the PHY CDR (Clock and Data Recovery) operation * to be unstable for some Synopsys PHYs. * The proposal now is to change the default and the recommended value * for GUSB3PIPECTL[21:19] in the RTL from 3'b100 to a minimum of 3'b001 */ if (dwc->revision <= DWC3_REVISION_210A) { reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); reg &= ~(DWC3_GUSB3PIPECTL_DELAY_P1P2P3_MASK); reg |= (DWC3_GUSB3PIPECTL_DELAY_P1P2P3(1)); dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); } if (dwc->revision >= DWC3_REVISION_250A) { reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); reg |= DWC3_GUSB3PIPECTL_DIS_RXDETP3; dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); } /* * WORKAROUND: DWC3 revisions 2.10a and earlier have a bug * Race Condition in PORTSC Write Followed by Read * If the software quickly does a read to the PORTSC, * some fields (port status change related fields * like OCC, etc.) may not have correct value * due to the current way of handling these bits. * After clearing the status register (for example, OCC) bit * by writing PORTSC tregister, software can insert some delay * (for example, 5 mac2_clk -> UTMI clock = 60 MHz -> * (16.66 ns x 5 = 84ns)) before reading the PORTSC to check status. */ if (dwc->revision <= DWC3_REVISION_210A) { reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); reg |= (DWC3_GUSB2PHYCFG_PHYIF); dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); } } int dwc3_udc_reset(struct dwc3 *dwc) { unsigned long timeout; u32 reg; int ret = 0; timeout = jiffies + msecs_to_jiffies(500); dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST); do { reg = dwc3_readl(dwc->regs, DWC3_DCTL); if (!(reg & DWC3_DCTL_CSFTRST)) break; if (time_after(jiffies, timeout)) { dev_err(dwc->dev, "Reset Timed Out\n"); ret = -ETIMEDOUT; break; } cpu_relax(); } while (true); return ret; } /** * dwc3_free_one_event_buffer - Frees one event buffer * @dwc: Pointer to our controller context structure * @evt: Pointer to event buffer to be freed */ static void dwc3_free_one_event_buffer(struct dwc3 *dwc, struct dwc3_event_buffer *evt) { dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma); } /** * dwc3_alloc_one_event_buffer - Allocates one event buffer structure * @dwc: Pointer to our controller context structure * @length: size of the event buffer * * Returns a pointer to the allocated event buffer structure on success * otherwise ERR_PTR(errno). */ static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length) { struct dwc3_event_buffer *evt; evt = devm_kzalloc(dwc->dev, sizeof(*evt), GFP_KERNEL); if (!evt) return ERR_PTR(-ENOMEM); evt->dwc = dwc; evt->length = length; evt->buf = dma_alloc_coherent(dwc->dev, length, &evt->dma, GFP_KERNEL); if (!evt->buf) return ERR_PTR(-ENOMEM); return evt; } /** * dwc3_free_event_buffers - frees all allocated event buffers * @dwc: Pointer to our controller context structure */ static void dwc3_free_event_buffers(struct dwc3 *dwc) { struct dwc3_event_buffer *evt; int i; for (i = 0; i < dwc->num_event_buffers; i++) { evt = dwc->ev_buffs[i]; if (evt) dwc3_free_one_event_buffer(dwc, evt); } } /** * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length * @dwc: pointer to our controller context structure * @length: size of event buffer * * Returns 0 on success otherwise negative errno. In the error case, dwc * may contain some buffers allocated but not all which were requested. */ static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) { int num; int i; num = DWC3_NUM_INT(dwc->hwparams.hwparams1); dwc->num_event_buffers = num; dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num, GFP_KERNEL); if (!dwc->ev_buffs) { dev_err(dwc->dev, "can't allocate event buffers array\n"); return -ENOMEM; } for (i = 0; i < num; i++) { struct dwc3_event_buffer *evt; evt = dwc3_alloc_one_event_buffer(dwc, length); if (IS_ERR(evt)) { dev_err(dwc->dev, "can't allocate event buffer\n"); return PTR_ERR(evt); } dwc->ev_buffs[i] = evt; } return 0; } /** * dwc3_event_buffers_setup - setup our allocated event buffers * @dwc: pointer to our controller context structure * * Returns 0 on success otherwise negative errno. */ int dwc3_event_buffers_setup(struct dwc3 *dwc) { struct dwc3_event_buffer *evt; int n; for (n = 0; n < dwc->num_event_buffers; n++) { evt = dwc->ev_buffs[n]; dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n", evt->buf, (unsigned long long) evt->dma, evt->length); evt->lpos = 0; dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), lower_32_bits(evt->dma)); dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), upper_32_bits(evt->dma)); dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), DWC3_GEVNTSIZ_SIZE(evt->length)); dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); } return 0; } void dwc3_event_buffers_cleanup(struct dwc3 *dwc) { struct dwc3_event_buffer *evt; int n; for (n = 0; n < dwc->num_event_buffers; n++) { evt = dwc->ev_buffs[n]; evt->lpos = 0; dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), DWC3_GEVNTSIZ_INTMASK | DWC3_GEVNTSIZ_SIZE(0)); dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); } } static void dwc3_core_num_eps(struct dwc3 *dwc) { struct dwc3_hwparams *parms = &dwc->hwparams; dwc->num_in_eps = DWC3_NUM_IN_EPS(parms); dwc->num_out_eps = DWC3_NUM_EPS(parms) - dwc->num_in_eps; dev_vdbg(dwc->dev, "found %d IN and %d OUT endpoints\n", dwc->num_in_eps, dwc->num_out_eps); } static void dwc3_cache_hwparams(struct dwc3 *dwc) { struct dwc3_hwparams *parms = &dwc->hwparams; parms->hwparams0 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS0); parms->hwparams1 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS1); parms->hwparams2 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS2); parms->hwparams3 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS3); parms->hwparams4 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS4); parms->hwparams5 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS5); parms->hwparams6 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS6); parms->hwparams7 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS7); parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8); } /** * dwc3_core_init - Low-level initialization of DWC3 Core * @dwc: Pointer to our controller context structure * * Returns 0 on success otherwise negative errno. */ int dwc3_core_init(struct dwc3 *dwc) { u32 reg; int ret; reg = dwc3_readl(dwc->regs, DWC3_GSNPSID); /* This should read as U3 followed by revision number */ if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) { dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); ret = -ENODEV; goto err0; } dwc->revision = reg; /* Adjust SOF accuracy only for revisions >= 2.50a */ if (dwc->revision < DWC3_REVISION_250A) dwc->adj_sof_accuracy = 0; /* issue device SoftReset too */ ret = dwc3_udc_reset(dwc); if (ret < 0) goto err0; dwc3_core_soft_reset(dwc); usb_phy_tune(dwc->usb3_phy); reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_SCALEDOWN_MASK; reg &= ~DWC3_GCTL_DISSCRAMBLE; switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { case DWC3_GHWPARAMS1_EN_PWROPT_CLK: reg &= ~DWC3_GCTL_DSBLCLKGTNG; break; default: dev_dbg(dwc->dev, "No power optimization available\n"); } /* * WORKAROUND: DWC3 revisions <1.90a have a bug * where the device can fail to connect at SuperSpeed * and falls back to high-speed mode which causes * the device to enter a Connect/Disconnect loop */ if (dwc->revision < DWC3_REVISION_190A) reg |= DWC3_GCTL_U2RSTECN; if (dwc->adj_sof_accuracy) { reg &= ~DWC3_GCTL_SOFITPSYNC; reg |= DWC3_GCTL_DSBLCLKGTNG; } dwc3_core_num_eps(dwc); dwc3_writel(dwc->regs, DWC3_GCTL, reg); dwc3_core_config(dwc); reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); reg |= DWC3_GUSB2PHYCFG_SUSPHY; if (dwc->adj_sof_accuracy) reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS; dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); reg |= DWC3_GUSB3PIPECTL_SUSPHY; dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); if (dwc->adj_sof_accuracy) { reg = dwc3_readl(dwc->regs, DWC3_GFLADJ); reg &= ~DWC3_GFLADJ_REFCLK_240MHZDECR_PLS1; reg &= ~DWC3_GFLADJ_REFCLK_240MHZ_DECR_MASK; reg |= DWC3_GFLADJ_REFCLK_240MHZ_DECR(0xA); reg |= DWC3_GFLADJ_REFCLK_LPM_SEL; reg &= ~DWC3_GFLADJ_REFCLK_FLADJ_MASK; reg |= DWC3_GFLADJ_REFCLK_FLADJ(0x7F0); dwc3_writel(dwc->regs, DWC3_GFLADJ, reg); } return 0; err0: return ret; } void dwc3_core_exit(struct dwc3 *dwc) { usb_phy_shutdown(dwc->usb2_phy); usb_phy_shutdown(dwc->usb3_phy); } #define DWC3_ALIGN_MASK (16 - 1) static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct dwc3_platform_data *pdata = dev_get_platdata(dev); struct device_node *node = dev->of_node; struct resource *res; struct dwc3 *dwc; int ret = -ENOMEM; void __iomem *regs; void *mem; mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL); if (!mem) { dev_err(dev, "not enough memory\n"); return -ENOMEM; } dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1); dwc->mem = mem; res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!res) { dev_err(dev, "missing IRQ\n"); return -ENODEV; } dwc->xhci_resources[1].start = res->start; dwc->xhci_resources[1].end = res->end; dwc->xhci_resources[1].flags = res->flags; dwc->xhci_resources[1].name = res->name; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "missing memory resource\n"); return -ENODEV; } if (node) { dwc->maximum_speed = of_usb_get_maximum_speed(node); dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0); dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1); dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); dwc->adj_sof_accuracy = of_property_read_bool(node, "adj-sof-accuracy"); dwc->dr_mode = of_usb_get_dr_mode(node); } else if (pdata) { dwc->maximum_speed = pdata->maximum_speed; dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); dwc->needs_fifo_resize = pdata->tx_fifo_resize; dwc->adj_sof_accuracy = pdata->adj_sof_accuracy; dwc->dr_mode = pdata->dr_mode; } else { dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); } /* default to superspeed if no maximum_speed passed */ if (dwc->maximum_speed == USB_SPEED_UNKNOWN) dwc->maximum_speed = USB_SPEED_SUPER; if (IS_ERR(dwc->usb2_phy)) { ret = PTR_ERR(dwc->usb2_phy); /* * if -ENXIO is returned, it means PHY layer wasn't * enabled, so it makes no sense to return -EPROBE_DEFER * in that case, since no PHY driver will ever probe. */ if (ret == -ENXIO) return ret; dev_err(dev, "no usb2 phy configured\n"); return -EPROBE_DEFER; } if (IS_ERR(dwc->usb3_phy)) { ret = PTR_ERR(dwc->usb3_phy); /* * if -ENXIO is returned, it means PHY layer wasn't * enabled, so it makes no sense to return -EPROBE_DEFER * in that case, since no PHY driver will ever probe. */ if (ret == -ENXIO) return ret; dev_err(dev, "no usb3 phy configured\n"); return -EPROBE_DEFER; } dwc->xhci_resources[0].start = res->start; dwc->xhci_resources[0].end = dwc->xhci_resources[0].start + DWC3_XHCI_REGS_END; dwc->xhci_resources[0].flags = res->flags; dwc->xhci_resources[0].name = res->name; res->start += DWC3_GLOBALS_REGS_START; /* * Request memory region but exclude xHCI regs, * since it will be requested by the xhci-plat driver. */ regs = devm_ioremap_resource(dev, res); if (IS_ERR(regs)) return PTR_ERR(regs); usb_phy_set_suspend(dwc->usb2_phy, 0); usb_phy_set_suspend(dwc->usb3_phy, 0); spin_lock_init(&dwc->lock); init_completion(&dwc->disconnect); platform_set_drvdata(pdev, dwc); dwc->regs = regs; dwc->regs_size = resource_size(res); dwc->dev = dev; dev->dma_mask = dev->parent->dma_mask; dev->dma_parms = dev->parent->dma_parms; dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask); pm_runtime_enable(dev); pm_runtime_get_sync(dev); pm_runtime_forbid(dev); dwc3_cache_hwparams(dwc); ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE); if (ret) { dev_err(dwc->dev, "failed to allocate event buffers\n"); ret = -ENOMEM; goto err0; } ret = dwc3_core_init(dwc); if (ret) { dev_err(dev, "failed to initialize core\n"); goto err0; } ret = dwc3_event_buffers_setup(dwc); if (ret) { dev_err(dwc->dev, "failed to setup event buffers\n"); goto err1; } if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) dwc->dr_mode = USB_DR_MODE_HOST; else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) dwc->dr_mode = USB_DR_MODE_PERIPHERAL; if (dwc->dr_mode == USB_DR_MODE_UNKNOWN) dwc->dr_mode = USB_DR_MODE_OTG; switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); ret = dwc3_gadget_init(dwc); if (ret) { dev_err(dev, "failed to initialize gadget\n"); goto err2; } break; case USB_DR_MODE_HOST: dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST); ret = dwc3_host_init(dwc); if (ret) { dev_err(dev, "failed to initialize host\n"); goto err2; } break; case USB_DR_MODE_OTG: dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); ret = dwc3_otg_init(dwc); if (ret) { dev_err(dev, "failed to initialize otg\n"); goto err2; } /* turn off PHYs to save power */ dwc3_core_exit(dwc); ret = dwc3_host_init(dwc); if (ret) { dev_err(dev, "failed to initialize host\n"); dwc3_otg_exit(dwc); goto err2; } ret = dwc3_gadget_init(dwc); if (ret) { dev_err(dev, "failed to initialize gadget\n"); dwc3_host_exit(dwc); dwc3_otg_exit(dwc); goto err2; } /* Now we are ready to start OTG */ ret = dwc3_otg_start(dwc); if (ret) { dev_err(dev, "failed to start otg\n"); dwc3_host_exit(dwc); dwc3_gadget_exit(dwc); dwc3_otg_exit(dwc); goto err2; } /* Unblock runtime PM for OTG */ pm_runtime_put_sync(dev); break; default: dev_err(dev, "Unsupported mode of operation %d\n", dwc->dr_mode); goto err2; } ret = dwc3_debugfs_init(dwc); if (ret) { dev_err(dev, "failed to initialize debugfs\n"); goto err3; } pm_runtime_allow(dev); return 0; err3: switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: dwc3_gadget_exit(dwc); break; case USB_DR_MODE_HOST: dwc3_host_exit(dwc); break; case USB_DR_MODE_OTG: dwc3_otg_stop(dwc); dwc3_host_exit(dwc); dwc3_gadget_exit(dwc); dwc3_otg_exit(dwc); break; default: /* do nothing */ break; } err2: dwc3_event_buffers_cleanup(dwc); err1: dwc3_core_exit(dwc); err0: dwc3_free_event_buffers(dwc); return ret; } static int dwc3_remove(struct platform_device *pdev) { struct dwc3 *dwc = platform_get_drvdata(pdev); usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); if (dwc->dr_mode != USB_DR_MODE_OTG) pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); dwc3_debugfs_exit(dwc); switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: dwc3_gadget_exit(dwc); break; case USB_DR_MODE_HOST: dwc3_host_exit(dwc); break; case USB_DR_MODE_OTG: dwc3_otg_stop(dwc); dwc3_host_exit(dwc); dwc3_gadget_exit(dwc); dwc3_otg_exit(dwc); break; default: /* do nothing */ break; } dwc3_event_buffers_cleanup(dwc); dwc3_free_event_buffers(dwc); usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); dwc3_core_exit(dwc); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); return 0; } #ifdef CONFIG_PM_SLEEP static int dwc3_prepare(struct device *dev) { struct dwc3 *dwc = dev_get_drvdata(dev); unsigned long flags; /* bring to full power */ pm_runtime_get_sync(dev); if (dwc->dr_mode == USB_DR_MODE_OTG) dwc3_otg_stop(dwc); spin_lock_irqsave(&dwc->lock, flags); switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: dwc3_gadget_prepare(dwc); break; case USB_DR_MODE_OTG: /* FALLTHROUGH */ case USB_DR_MODE_HOST: default: dwc3_event_buffers_cleanup(dwc); break; } spin_unlock_irqrestore(&dwc->lock, flags); return 0; } static void dwc3_complete(struct device *dev) { struct dwc3 *dwc = dev_get_drvdata(dev); unsigned long flags; spin_lock_irqsave(&dwc->lock, flags); switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: dwc3_gadget_complete(dwc); break; case USB_DR_MODE_OTG: /* FALLTHROUGH */ case USB_DR_MODE_HOST: default: dwc3_event_buffers_setup(dwc); break; } spin_unlock_irqrestore(&dwc->lock, flags); if (dwc->dr_mode == USB_DR_MODE_OTG) dwc3_otg_start(dwc); /* Compensate usage count incremented during prepare */ pm_runtime_put_sync(dev); } static int dwc3_suspend(struct device *dev) { struct dwc3 *dwc = dev_get_drvdata(dev); unsigned long flags; spin_lock_irqsave(&dwc->lock, flags); switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: dwc3_gadget_suspend(dwc); break; case USB_DR_MODE_OTG: break; case USB_DR_MODE_HOST: usb_phy_shutdown(dwc->usb3_phy); usb_phy_shutdown(dwc->usb2_phy); default: /* do nothing */ break; } /* backup GCTL only in non-OTG modes */ if (dwc->dr_mode != USB_DR_MODE_OTG) dwc->gctl = dwc3_readl(dwc->regs, DWC3_GCTL); spin_unlock_irqrestore(&dwc->lock, flags); return 0; } static int dwc3_resume(struct device *dev) { struct dwc3 *dwc = dev_get_drvdata(dev); unsigned long flags; spin_lock_irqsave(&dwc->lock, flags); if (dwc->dr_mode != USB_DR_MODE_OTG) dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl); switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: dwc3_gadget_resume(dwc); break; case USB_DR_MODE_OTG: break; case USB_DR_MODE_HOST: usb_phy_init(dwc->usb3_phy); usb_phy_init(dwc->usb2_phy); default: /* do nothing */ break; } spin_unlock_irqrestore(&dwc->lock, flags); pm_runtime_disable(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); return 0; } static const struct dev_pm_ops dwc3_dev_pm_ops = { .prepare = dwc3_prepare, .complete = dwc3_complete, SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume) }; #define DWC3_PM_OPS &(dwc3_dev_pm_ops) #else #define DWC3_PM_OPS NULL #endif #ifdef CONFIG_OF static const struct of_device_id of_dwc3_match[] = { { .compatible = "snps,dwc3" }, { .compatible = "synopsys,dwc3" }, { }, }; MODULE_DEVICE_TABLE(of, of_dwc3_match); #endif static struct platform_driver dwc3_driver = { .probe = dwc3_probe, .remove = dwc3_remove, .driver = { .name = "dwc3", .of_match_table = of_match_ptr(of_dwc3_match), .pm = DWC3_PM_OPS, }, }; module_platform_driver(dwc3_driver); MODULE_ALIAS("platform:dwc3"); MODULE_AUTHOR("Felipe Balbi "); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver");