*************************************************************************
   ____  ____ 
  /   /\/   / 
 /___/  \  /   
 \   \   \/     Copyright 2014 Xilinx, Inc. All rights reserved.
  \   \        This file contains confidential and proprietary 
  /   /        information of Xilinx, Inc. and is protected under U.S. 
 /___/   /\    and international copyright and other intellectual 
 \   \  /  \   property laws. 
  \___\/\___\ 
 
*************************************************************************

Vendor: Xilinx 
Current readme.txt Version: <0.0.1>
Date Last Modified:  <08AUG2014> 
Date Created: <08AUG2014>

Associated Filename: KFMC_VCC18_MIPI_TX_2_RX.ffs, KFMC_VCC18_MIPI_TX_2_RX.pjh, sim_model.pdf, Schematic Prints FMC Card Final.pdf

Supported Device(s): Spartan-6 and 7 Series FPGAs
   
*************************************************************************

Disclaimer: 

      This disclaimer is not a license and does not grant any rights to 
      the materials distributed herewith. Except as otherwise provided in 
      a valid license issued to you by Xilinx, and to the maximum extent 
      permitted by applicable law: (1) THESE MATERIALS ARE MADE AVAILABLE 
      "AS IS" AND WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL 
      WARRANTIES AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, 
      INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, 
      NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and 
      (2) Xilinx shall not be liable (whether in contract or tort, 
      including negligence, or under any other theory of liability) for 
      any loss or damage of any kind or nature related to, arising under 
      or in connection with these materials, including for any direct, or 
      any indirect, special, incidental, or consequential loss or damage 
      (including loss of data, profits, goodwill, or any type of loss or 
      damage suffered as a result of any action brought by a third party) 
      even if such damage or loss was reasonably foreseeable or Xilinx 
      had been advised of the possibility of the same.

Critical Applications:

      Xilinx products are not designed or intended to be fail-safe, or 
      for use in any application requiring fail-safe performance, such as 
      life-support or safety devices or systems, Class III medical 
      devices, nuclear facilities, applications related to the deployment 
      of airbags, or any other applications that could lead to death, 
      personal injury, or severe property or environmental damage 
      (individually and collectively, "Critical Applications"). Customer 
      assumes the sole risk and liability of any use of Xilinx products 
      in Critical Applications, subject only to applicable laws and 
      regulations governing limitations on product liability.

THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS PART OF THIS 
FILE AT ALL TIMES.

*************************************************************************

This readme file contains these sections:

1. REVISION HISTORY
2. OVERVIEW
3. SOFTWARE TOOLS AND SYSTEM REQUIREMENTS
4. DESIGN FILE HIERARCHY
5. INSTALLATION AND OPERATING INSTRUCTIONS
6. OTHER INFORMATION (OPTIONAL)
7. SUPPORT


1. REVISION HISTORY 

               	Readme  
Date        	Version    	  Revision Description
=========================================================================
08/18/14 	1.0        	  Initial Xilinx release.

=========================================================================



2. OVERVIEW

This readme describes the accompanying files in the zip file which are associated with the MIPI HW demonstration platform.  

The purpose of these files is to assist in the design and simulation of a high speed, low cost MIPI interface.  





3. SOFTWARE TOOLS AND SYSTEM REQUIREMENTS

The accompanying files were successfully run on HyperLynx, ver 9.0



4. DESIGN FILE HIERARCHY

N/A


5. INSTALLATION AND OPERATING INSTRUCTIONS 

N/A


6. OTHER INFORMATION (OPTIONAL) 

File definitions : 

KFMC_VCC18_MIPI_TX_2_RX.ffs : Hyperlynx Free Form Schematic file that is shown in the picture in the word document.  This is the simulation model.
KFMC_VCC18_MIPI_TX_2_RX.pjh : Hyperlynx project file.
sim_model.pdf : schematic capture of simulated design in Adobe pdf format. 
Schematic Prints FMC Card Final.pdf: Schematic of FMC card which is used for MIPI demonstration platform.


7. SUPPORT

To obtain technical support for this reference design, go to 
www.xilinx.com/support to locate answers to known issues in the Xilinx
Answers Database.

Zynq IBIS models may be found at : www.xilinx.com/download 

The demonstration platform and configuration files can be accessed by request from your local FAE / Representative. 